Summit
Display / User Interface Failure
Display is blank or segments missing, but unit still cools.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose ribbon cable to display, Failed display PCB, Moisture intrusion into control panel, Cracked display board
How to Fix / Troubleshooting
Safety: Unplug the wine cooler before removing the control panel.
- Remove control bezel: Carefully remove the front control panel trim to access the display board.
- Check connections: Reseat the ribbon cable or harness between the display and main board.
- Inspect for moisture: Look for signs of condensation or corrosion. Dry the area thoroughly and improve door seal if moisture is present.
- Replace display board: If segments are permanently missing or the display is dead, install a new display/control panel board compatible with your Summit model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / Control Panel Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements