Wine cooler runs but does not get cold enough; temperature stays above setpoint.

Safety: Unplug the unit before cleaning or removing panels.

• Clean condenser: Pull the Summit wine cooler away from the wall. Use a soft brush and vacuum to remove dust from the rear condenser coils and grille.
• Check condenser fan: With the rear panel removed, plug in briefly and observe the condenser fan when the compressor runs. If it does not spin or is noisy, replace the condenser fan motor.
• Inspect door gasket: Close a sheet of paper in the door and pull it out. If it slides out easily all around, the gasket may be leaking. Replace the door gasket if worn or warped.
• Ventilation: Ensure proper clearance around the unit and that it is not installed in a cabinet without ventilation.
• If still warm: Persistent poor cooling after these steps suggests a sealed‑system issue (refrigerant leak, weak compressor). Contact a licensed refrigeration technician; sealed‑system repairs require specialized tools and EPA certification.