Teka
Dim or Faulty Display
Display is very dim, segments are missing, or the temperature readout is difficult to see.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED display, Poor connection on display board, Low voltage from PCB, Faulty display module
How to Fix / Troubleshooting
Safety: Unplug the wine cooler before accessing the display module.
- Inspect connections: Remove the control panel and check the display board connectors. Reseat them firmly.
- Check for damage: Look for cracked solder joints or damaged display segments on the PCB.
- Measure supply voltage: With caution and proper tools, verify that the display board is receiving the correct low-voltage supply from the main PCB. Then disconnect power again.
- Replace display module: If the display remains dim or incomplete, replace the display PCB or module with the correct Teka part.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements