Water pooling at the bottom of the wine cooler or leaking onto the floor from the front or rear.

Safety: Unplug the unit before working near electrical components. Wipe up any standing water to prevent slipping.

• Locate drain hole: Inside the cabinet, find the small drain hole at the rear (below the evaporator area). Check for ice, debris, or mold blocking it.
• Clear blockage: Use a soft pipe cleaner or a small plastic probe to gently clear the drain. Flush with a small amount of warm water using a syringe or turkey baster.
• Inspect drain tube and pan: From the rear, locate the drain tube leading to the condensate pan above the compressor. Ensure it is properly connected and not kinked. Check the pan for cracks.
• Check gasket and door closure: Replace a faulty gasket and ensure the door closes fully to reduce excess condensation.
• Monitor: After clearing the drain, run the unit and verify that water now drips into the rear pan instead of pooling inside.