Safety: Unplug the wine cooler before accessing fans. Keep fingers clear of blades when testing.

Steps:

Identify which fan: Listen (before unplugging) for which fan is not running: interior/evaporator fan (inside cabinet) or condenser fan (rear, near compressor).
Evaporator fan: Remove interior rear panel to access the fan. Check for ice buildup or foreign objects blocking the blades. Clear obstructions and ensure the fan spins freely by hand.
Condenser fan: Remove rear service panel. Inspect for dust buildup, debris, or bent blades. Clean with a soft brush and vacuum.
Electrical test: With power off, check fan motor resistance across its terminals. An open circuit indicates a failed motor that must be replaced.
Wiring and board: Inspect connectors and harnesses for damage. If the motor tests good but does not receive voltage when commanded on, the main control board may be faulty.

After repair: Reassemble, restore power, and verify that all fans run during cooling operation and that E8 clears.

E8 error displayed; unit may run continuously or not maintain set temperature.

Possible Causes