E6
TYLZA
Evaporator Fan Motor Fault
Display shows E6 and the internal fan does not run, causing uneven temperatures.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed evaporator fan motor, Ice obstructing fan blades, Broken fan blade, Loose fan motor connector at main board
How to Fix / Troubleshooting
Safety: Disconnect power before working inside the cabinet.
- Listen for fan: With the door closed and unit running (before unplugging), listen for the evaporator fan. If silent, proceed.
- Access fan: Unplug the unit, remove shelves, and take off the rear interior panel to expose the evaporator fan assembly.
- Check for ice or obstruction: Look for ice buildup or foreign objects blocking the fan. Defrost and clear obstructions if present.
- Inspect wiring: Ensure the fan motor connector is firmly attached and wires are not damaged.
- Test fan motor: With a multimeter, check for appropriate resistance across the fan motor leads. An open circuit indicates a failed motor.
- Replace fan: Install a TYLZA-compatible evaporator fan motor and blade if needed, secure with screws, and ensure the blade spins freely.
- Reassemble and test: Restore power and confirm the fan runs and E6 clears.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements