Wine cooler runs but does not get cold enough; temperature remains above setpoint with no error code displayed.

Safety first: Unplug the Vestfrost wine cooler before cleaning or accessing rear components.

Steps to check and fix:

• 1. Confirm settings and load: Ensure the temperature is set correctly and the cabinet is not overloaded with bottles blocking airflow.
• 2. Clean condenser: Remove the rear lower panel and gently vacuum or brush dust from the condenser coil. A clogged condenser greatly reduces cooling efficiency.
• 3. Check condenser fan: Spin the fan by hand to ensure it moves freely. Restore power briefly and verify that it runs when the compressor is on. Replace the fan motor if it does not run.
• 4. Check door seal: Inspect the door gasket for gaps or damage. Close the door on a sheet of paper; if it pulls out easily, the seal may be weak. Replace the gasket if necessary.
• 5. Monitor compressor operation: If the compressor runs almost continuously and the condenser is only mildly warm, suspect a weak compressor or low refrigerant. This requires a certified technician for sealed-system diagnosis and repair.