Vinotemp Short Cycling / Control or Refrigeration Issue

Compressor starts and stops frequently (short cycling) without reaching set temperature.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Overheating compressor due to dirty condenser, Faulty start relay or overload, Incorrect thermostat differential settings

How to Fix / Troubleshooting

Safety first: Unplug the unit before cleaning or testing electrical parts.

Steps to address short cycling:

  • 1. Clean condenser coils: Remove dust and lint from coils to improve heat rejection.
  • 2. Check condenser fan: Ensure the fan runs whenever the compressor is on. Replace if intermittent or noisy.
  • 3. Inspect start relay/overload: Replace a weak or overheating start device on the compressor.
  • 4. Verify ambient temperature: Extremely high room temperatures can cause thermal overloads to trip. Improve ventilation or move the unit to a cooler location.
  • 5. Control settings: If the model allows, increase the temperature differential or hysteresis to reduce rapid cycling.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Compressor Start Relay
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements