Vinotemp Worn or Contaminated Keypad

Control panel buttons respond intermittently or require very hard presses.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Wear on touch contacts, Moisture or dirt under overlay, Loose keypad ribbon cable

Safety first: Unplug the unit before removing the control panel.

Steps to restore keypad function:

1. Clean surface: Wipe the panel with a soft, dry cloth. Do not use harsh chemicals.
2. Reseat ribbon cable: Remove the control bezel and firmly reseat the keypad ribbon cable into the connector.
3. Dry moisture: If condensation is present, allow the panel to dry completely before reassembly.
4. Replace keypad/UI board: If buttons remain unreliable, replace the keypad or entire user interface board.

Medium 3/5

Keypad / User Interface Board

Check Price on Amazon

We may earn a commission from links on this page.