Safety first: Unplug the cooler before working on the light assembly.

Steps to restore interior lighting:

1. Check light settings: Some Vinotemp models allow the light to be turned off via the control panel. Ensure it is set to ON or DOOR mode.
2. Test door switch: If the light should come on when the door opens, test the door switch for continuity as described in the door error section. Replace if faulty.
3. Inspect LED strip or bulb: Remove the light cover inside the cabinet. Check for visible damage or dark spots on the LED strip. Test for voltage at the light connector when the light should be on.
4. Replace light assembly: Install a Vinotemp-compatible LED strip or bulb. Ensure correct polarity if using a DC LED module.

Interior light does not work but cooling is normal.

Possible Causes