Vinotemp
Electrical Overload or Short Circuit
Unit trips the household circuit breaker when it starts.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted compressor windings, Damaged power cord, Shorted Peltier module or fan motor
How to Fix / Troubleshooting
Safety first: Do not repeatedly reset a tripping breaker. Unplug the unit and investigate.
Steps to diagnose breaker trips:
- 1. Inspect power cord: Look for cuts or crushed sections. Replace if damaged.
- 2. Test on a different circuit: Plug the cooler into another properly rated circuit to rule out a weak breaker.
- 3. Check components for shorts: With the unit unplugged, measure resistance from each compressor terminal to ground; any continuity indicates a shorted compressor. Similarly, test Peltier modules and fan motors for shorts.
- 4. Replace failed components: Replace any shorted module, motor, or cord. Compressor replacement requires a licensed technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements