Whirlpool
Stuck Door Switch or Control Logic Fault
Wine cooler interior light stays on even when the door is closed, causing warming.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Misaligned or failed door switch, Broken door magnet (for reed switch models), Control board not recognizing door closed signal, Door not fully closing
How to Fix / Troubleshooting
Safety: Unplug the unit before adjusting switches or wiring.
Steps:
- Check door closure: Ensure nothing is obstructing the door and that the gasket seals all around.
- Observe switch action: Locate the door switch and verify that the plunger is fully depressed when the door is closed.
- Adjust or replace switch: If the switch does not fully depress, adjust its position or replace it with a Whirlpool-compatible part.
- Magnetic switch models: If a magnet in the door activates a hidden reed switch, ensure the magnet is still present and aligned. Replace the magnet strip or door trim if missing.
- Control board: If the switch tests good electrically but the light remains on, the control board may be faulty and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements