Wine cooler is running but interior temperature is too warm and cannot reach setpoint.

Safety: Unplug the unit before cleaning coils or accessing fans.

Steps:

• Check temperature setting: Ensure the setpoint is low enough for desired storage temperature.
• Inspect bottle loading: Avoid stacking bottles tightly against the rear wall or blocking internal vents; allow space for air circulation.
• Clean condenser coil: Remove the rear access panel and gently brush or vacuum dust from the condenser coil.
• Verify fan operation: Confirm that both the condenser fan (rear) and evaporator fan (inside behind panel) run when the compressor is on.
• Replace faulty fan: If a fan is not running and receives power, replace the Whirlpool-compatible fan motor.
• Allow time to stabilize: After adjustments and cleaning, allow 12–24 hours for the temperature to stabilize.