Wolf Stuck Interior Light / Door Switch Fault

Interior light stays on even when the door is closed, causing warming and possible condensation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Misaligned or failed door switch, Shorted light control on main board, Door not fully closing due to obstruction

Safety: Unplug the unit if the light remains on to prevent overheating.

Check for obstructions: Ensure shelves, bottles, or racks are not preventing the door from closing fully.
Test door switch: Manually press the switch and observe if the light turns off. If not, the switch or control board is suspect.
Inspect switch and wiring: Replace the door switch if physically damaged or if it does not change state when pressed.
If switch is good: The main control board may have a stuck light relay and will need replacement.

Medium 3/5

Door Switch Sensor

Check Price on Amazon

We may earn a commission from links on this page.