Zanussi
Display Module or Backlight Failure
Display is completely blank, but the wine cooler is still cooling.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LED display module, Blown display backlight circuit, Loose display connector, Partial failure of display PCB
How to Fix / Troubleshooting
Safety: Disconnect mains power before accessing the display or control panel.
Steps:
- Check interior light and cooling: If these work, the main control is likely functioning and the issue is isolated to the display.
- Inspect display connections: Remove the control panel and check the connectors between the main PCB and the display module. Reseat them firmly.
- Look for damage: Examine the display board for burnt components or cracked solder joints.
- Replace display module: If connections are good but the display remains blank, replace the display PCB or module with the correct Zanussi part.
Tip: Mark the original wiring and take photos before disassembly to ensure correct reassembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display PCB / Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements