Zanussi No Power / Dead Appliance

Wine cooler will not power on at all; no lights, no display, no cooling.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal fuse on PCB, Faulty mains cable, Failed main control board power supply, Faulty wall outlet

How to Fix / Troubleshooting

Safety: Unplug the unit before opening any panels. Only qualified persons should test live voltage.

Steps:

  • Check outlet: Test the wall socket with another appliance. Reset any tripped breakers.
  • Inspect power cord: Look for visible damage. Replace the cord if necessary.
  • Access main PCB: Remove the rear panel and locate the main control board. Look for an onboard fuse and check it for continuity. Replace only with the same type and rating.
  • Check for burnt components: If the board shows signs of burning or cracked components, it likely needs replacement.

Action: If the fuse blows again immediately or the board is visibly damaged, replace the main control board or contact Zanussi service.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Main Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements