Gorenje Display Panel or LED Board Failure

Indoor unit display or LEDs do not work, but the unit still responds to remote and operates.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed display PCB, Loose ribbon cable between display and main PCB, Burnt LEDs, Moisture ingress into front panel

Safety: Disconnect power before removing the front panel.

Steps:

Check brightness settings: Some Gorenje models allow dimming or turning off the display via remote. Restore default display settings.
Inspect connections: Remove the front cover and check the ribbon cable or connector between the display board and main PCB. Reseat it carefully.
Replace display board: If connections are good but the display remains dead, replace the display/indicator PCB.

Medium 3/5

Indoor Display / Indicator PCB

Check Price on Amazon

We may earn a commission from links on this page.