Carpet cleaner leaves streaks or lines of dirt and detergent on the carpet.

Safety first: Unplug the unit before cleaning the nozzle.

• 1. Clean spray bar: Remove the floor nozzle and thoroughly clean the spray jets with warm water and a soft brush.
• 2. Inspect squeegee: Check the rubber squeegee or pickup lip at the rear of the nozzle. If it is nicked, warped, or hardened, replace the nozzle or squeegee strip.
• 3. Check brush condition: Replace the brush roll if bristles are worn unevenly, which can cause inconsistent agitation.
• 4. Adjust height (if applicable): Set the nozzle height according to carpet type as per the manual to ensure proper contact.