VAX Platinum
Electrical Short / Overcurrent
Machine trips the household circuit breaker or blows fuse when switched on
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted motor windings, Damaged power cord, Water ingress into electrical components, Faulty heater element
How to Fix / Troubleshooting
Safety first: Do not repeatedly reset the breaker or replace fuses. Unplug the machine immediately. Risk of electric shock and fire.
- Inspect power cord: Check for cuts, crushed sections, or exposed wires. If damaged, do not use the machine until the cord is replaced.
- Check for moisture: If the machine was recently exposed to heavy spills or used in a very wet environment, allow it to dry in a warm, dry room for at least 48 hours.
- Isolate cause (advanced): A technician can disconnect components (motor, heater) one by one to identify the shorted part.
- Professional repair: Because this involves mains voltage and potential internal shorts, contact an authorised VAX service centre for diagnosis and repair.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Suction Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements