E08 error appears and the machine leaks internally or stops brewing mid-cycle.

Safety first: Unplug the machine and allow it to cool before opening any covers.

External cleaning:

• Clean the coffee outlet spouts with a pin or fine brush to remove dried coffee.
• Run a cleaning cycle with a Beko-approved cleaning tablet if your model supports it.
• Run a full descaling cycle to clear scale from the hydraulic circuit.

Internal inspection (advanced):

• Remove the brew group and inspect the metal or plastic filter screen for blockage; clean thoroughly.
• Open the machine to locate the overpressure valve near the pump or thermoblock. Check for leaks or stuck operation.
• Inspect silicone hoses for blockages, kinks, or internal collapse.

If the overpressure valve is stuck or leaking, replace it. Persistent E08 after cleaning and descaling may indicate a deeper hydraulic or control issue requiring professional service.