Beko Coffee Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Machine does not start brewing, display shows E01 shortly after pressing start.
Water Tank Detection / Empty Tank Fault
E02
Machine stops shortly after starting, no water dispensed, E02 displayed on screen.
Water Flow / Flowmeter Fault
E03
Machine heats up but does not pump water through the coffee spout, E03 appears on display.
Pump Failure / Pump Circuit Fault
E04
Machine displays E04 and stops; no steam or hot water, or temperature seems incorrect.
Temperature Sensor / NTC Fault
E05
Machine shows E05, does not heat water, coffee is cold or brewing does not start.
Heating Element / Thermoblock Fault
E06
Display shows E06 and the grinder does not run when making coffee.
Grinder Motor Fault
E07
Machine displays E07 and brewing stops; internal brew group does not move to correct position.
Brew Group Position / Drive Motor Fault
E08
E08 error appears and the machine leaks internally or stops brewing mid-cycle.
Overpressure / Hydraulic Circuit Fault
E09
Machine shows E09 and does not detect the drip tray or waste coffee container correctly.
Drip Tray / Waste Container Detection Fault
E10
E10 displayed, machine reports waste coffee container full even after emptying.
Waste Coffee Counter / Sensor Fault
E11
Machine shows E11 and milk frothing or steam function does not work.
Steam Circuit / Steam Thermostat Fault
E12
E12 error appears and the machine shuts down unexpectedly during operation.
Overtemperature / Safety Cut-Out Fault
E13
Machine displays E13 and water is found in the base or leak tray inside the machine.
Internal Leak / Water Level in Base Fault
E14
E14 error and the display or buttons do not respond correctly.
User Interface / Touch Panel Communication Fault
E15
E15 displayed, machine cannot detect coffee beans or reports 'no beans' even when hopper is full.
Bean Level / Hopper Sensor Fault
Symptom
Burning smell or electrical smell during operation.
Overheating / Electrical Insulation Fault
Symptom
Buttons or touch keys do not respond or respond intermittently.
Keypad / Touch Sensor Fault
Symptom
Coffee is too strong or bitter even on normal settings.
Over-Extraction / Flow Restriction Fault
Symptom
Coffee is weak or watery even on the strongest setting.
Under-Extraction / Grind or Dose Fault
Symptom
Coffee maker does not power on at all, no lights or display.
No Power / Main Supply Fault
Symptom
Display is very dim or flickers during operation.
Display Power / Backlight Fault
Symptom
Ground coffee is dispensed into the drip tray or inside the machine instead of into the brew group.
Ground Coffee Chute Misalignment / Blockage
Symptom
Hot water function works, but coffee brewing does not start or stops early.
Coffee Circuit Control Fault
Symptom
Loud knocking or clicking noise from inside the machine during brewing.
Brew Group Drive Noise / Misalignment
Symptom
Machine does not grind beans; instead, it dispenses hot water or very weak coffee as if using pre-ground.
Bean Feed / Grinder Engagement Fault
Symptom
Machine frequently asks to fill water tank even when tank is full.
False Empty Tank Detection
Symptom
Machine is very noisy during grinding, with grinding sound much louder than usual.
Grinder Mechanical Noise / Wear
Symptom
Machine powers on but will not start brewing when the start button is pressed.
Start Circuit / Control Logic Fault
Symptom
Machine requests descaling too frequently or does not reset descaling indicator.
Descale Counter / Sensor Logic Fault
Symptom
Machine shuts off randomly during brewing without showing an error code.
Intermittent Power / Thermal Cut-Out
Symptom
Machine vibrates excessively on the countertop during brewing.
Excessive Vibration
Symptom
Milk froth is poor, large bubbles, or no froth at all.
Milk Frothing Performance Fault
Symptom
No coffee comes out of the spouts, but you can hear the pump running.
Coffee Outlet Blockage
Symptom
Sour or off-tasting coffee even with fresh beans.
Hygiene / Contamination Fault
Symptom
Steam wand drips water continuously even when steam is off.
Steam Valve Leakage
Symptom
Used coffee pucks in the waste container are very wet and sludgy.
Poor Coffee Puck Formation
Symptom
Water leaks from under the machine onto the countertop.
External Leak / Base Leak
Symptom
Water or coffee leaks inside the machine, visible behind the service door or around the brew group.
Internal Brew Group Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Machine does not start brewing, display shows E01 shortly after pressing start.
|
Water Tank Detection / Empty Tank Fault | View Details |
| E02 |
Machine stops shortly after starting, no water dispensed, E02 displayed on screen.
|
Water Flow / Flowmeter Fault | View Details |
| E03 |
Machine heats up but does not pump water through the coffee spout, E03 appears on display.
|
Pump Failure / Pump Circuit Fault | View Details |
| E04 |
Machine displays E04 and stops; no steam or hot water, or temperature seems incorrect.
|
Temperature Sensor / NTC Fault | View Details |
| E05 |
Machine shows E05, does not heat water, coffee is cold or brewing does not start.
|
Heating Element / Thermoblock Fault | View Details |
| E06 |
Display shows E06 and the grinder does not run when making coffee.
|
Grinder Motor Fault | View Details |
| E07 |
Machine displays E07 and brewing stops; internal brew group does not move to correct position.
|
Brew Group Position / Drive Motor Fault | View Details |
| E08 |
E08 error appears and the machine leaks internally or stops brewing mid-cycle.
|
Overpressure / Hydraulic Circuit Fault | View Details |
| E09 |
Machine shows E09 and does not detect the drip tray or waste coffee container correctly.
|
Drip Tray / Waste Container Detection Fault | View Details |
| E10 |
E10 displayed, machine reports waste coffee container full even after emptying.
|
Waste Coffee Counter / Sensor Fault | View Details |
| E11 |
Machine shows E11 and milk frothing or steam function does not work.
|
Steam Circuit / Steam Thermostat Fault | View Details |
| E12 |
E12 error appears and the machine shuts down unexpectedly during operation.
|
Overtemperature / Safety Cut-Out Fault | View Details |
| E13 |
Machine displays E13 and water is found in the base or leak tray inside the machine.
|
Internal Leak / Water Level in Base Fault | View Details |
| E14 |
E14 error and the display or buttons do not respond correctly.
|
User Interface / Touch Panel Communication Fault | View Details |
| E15 |
E15 displayed, machine cannot detect coffee beans or reports 'no beans' even when hopper is full.
|
Bean Level / Hopper Sensor Fault | View Details |
| – |
Burning smell or electrical smell during operation.
|
Overheating / Electrical Insulation Fault | View Details |
| – |
Buttons or touch keys do not respond or respond intermittently.
|
Keypad / Touch Sensor Fault | View Details |
| – |
Coffee is too strong or bitter even on normal settings.
|
Over-Extraction / Flow Restriction Fault | View Details |
| – |
Coffee is weak or watery even on the strongest setting.
|
Under-Extraction / Grind or Dose Fault | View Details |
| – |
Coffee maker does not power on at all, no lights or display.
|
No Power / Main Supply Fault | View Details |
| – |
Display is very dim or flickers during operation.
|
Display Power / Backlight Fault | View Details |
| – |
Ground coffee is dispensed into the drip tray or inside the machine instead of into the brew group.
|
Ground Coffee Chute Misalignment / Blockage | View Details |
| – |
Hot water function works, but coffee brewing does not start or stops early.
|
Coffee Circuit Control Fault | View Details |
| – |
Loud knocking or clicking noise from inside the machine during brewing.
|
Brew Group Drive Noise / Misalignment | View Details |
| – |
Machine does not grind beans; instead, it dispenses hot water or very weak coffee as if using pre-ground.
|
Bean Feed / Grinder Engagement Fault | View Details |
| – |
Machine frequently asks to fill water tank even when tank is full.
|
False Empty Tank Detection | View Details |
| – |
Machine is very noisy during grinding, with grinding sound much louder than usual.
|
Grinder Mechanical Noise / Wear | View Details |
| – |
Machine powers on but will not start brewing when the start button is pressed.
|
Start Circuit / Control Logic Fault | View Details |
| – |
Machine requests descaling too frequently or does not reset descaling indicator.
|
Descale Counter / Sensor Logic Fault | View Details |
| – |
Machine shuts off randomly during brewing without showing an error code.
|
Intermittent Power / Thermal Cut-Out | View Details |
| – |
Machine vibrates excessively on the countertop during brewing.
|
Excessive Vibration | View Details |
| – |
Milk froth is poor, large bubbles, or no froth at all.
|
Milk Frothing Performance Fault | View Details |
| – |
No coffee comes out of the spouts, but you can hear the pump running.
|
Coffee Outlet Blockage | View Details |
| – |
Sour or off-tasting coffee even with fresh beans.
|
Hygiene / Contamination Fault | View Details |
| – |
Steam wand drips water continuously even when steam is off.
|
Steam Valve Leakage | View Details |
| – |
Used coffee pucks in the waste container are very wet and sludgy.
|
Poor Coffee Puck Formation | View Details |
| – |
Water leaks from under the machine onto the countertop.
|
External Leak / Base Leak | View Details |
| – |
Water or coffee leaks inside the machine, visible behind the service door or around the brew group.
|
Internal Brew Group Leak | View Details |
No matching codes found
Advertisements