Beko
Start Circuit / Control Logic Fault
Machine powers on but will not start brewing when the start button is pressed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty start button or touch sensor, Door or service panel not closed, Brew group not detected, Firmware lock due to previous error
How to Fix / Troubleshooting
Safety first: Disconnect power before opening any covers.
Operational checks:
- Ensure all removable components (water tank, drip tray, waste container, brew group) are correctly installed.
- Confirm that any service door is fully closed and latches properly.
- Try a different function (e.g., hot water or rinse) to see if any cycle starts.
- Unplug the machine for 10 minutes to reset the control logic.
Button / touch panel:
- If the start button feels stuck, gently clean around it with a dry cloth.
- For touch panels, wipe with a dry, soft cloth to remove moisture or residue.
If the machine still does not respond, the user interface board or main PCB may be faulty and should be checked by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements