Beko
Poor Coffee Puck Formation
Used coffee pucks in the waste container are very wet and sludgy.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Insufficient tamping pressure in brew group, Worn brew group piston seals, Incorrect grind size, Low pump pressure
How to Fix / Troubleshooting
User adjustments:
- Adjust the grind slightly finer to improve puck formation.
Brew group maintenance:
- Clean and lubricate the brew group.
- Replace worn piston seals using a seal kit.
If pucks remain very wet, the pump or pressure valve may be weak and should be tested by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Brew Group Piston Seals
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements