Electrolux Leaking Steam Valve

Steam wand drips continuously even when steam is turned off.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn steam valve seals, Scale buildup preventing full closure, Damaged steam knob mechanism

Safety: Steam is very hot. Allow the machine to cool and unplug before working on the steam valve.

Steps:

1. Descale: Run a descaling cycle focusing on the steam circuit to dissolve scale around the valve.
2. Operate valve: Turn the steam knob fully open and closed several times to help reseat the seal.
3. Inspect valve (advanced): Remove the side panel and access the steam valve body. Check for leaks around the spindle and connections.

Resolution: Replace the steam valve or its internal seals if dripping persists.

Medium 3/5

Steam Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.