Farberware
Instant Power Cut / Protection Trip
Unit shuts off immediately when the brew cycle is started.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted heating element, Shorted wiring, Faulty control board, Tripping household breaker or GFCI
How to Fix / Troubleshooting
Safety first: If the breaker trips, do not repeatedly reset it without finding the cause. Unplug the coffee maker.
- Test on another outlet: Plug into a different circuit to confirm if the issue follows the coffee maker.
- Inspect cord and plug: Look for damage or burn marks. Replace if any are found.
- Internal inspection (advanced): Remove the bottom cover and check for pinched wires, exposed conductors, or burnt components. Repair or replace damaged wiring.
- Test heater: Use a multimeter to check the heating element for shorts to ground. Replace the element if shorted.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Heating Element / Wiring Harness / Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements