Jura Brew Group Jammed in Drive Position

Brew group is stuck and cannot be removed

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Power interrupted mid-cycle, Brew group overfilled with coffee, Drive gears stopped in wrong position, Foreign object blocking brew group

How to Fix / Troubleshooting

Safety first: Do not force the brew group; you may break it.

Step 1 – Power cycle with doors closed:

Reinsert the drip tray and close the service door.
Turn the machine off and on to allow it to attempt to reset the brew group position.

Step 2 – Gentle movement:

If the machine allows, gently wiggle the brew group while the machine is off to relieve tension, then try removal again.

Step 3 – Advanced manual reset:

Unplug and remove the housing.
Manually rotate the brew drive gear slightly to move the group toward its home position, then try removing the brew group.

Step 4 – Inspect and clean:

Once removed, clean and lubricate the brew group.
Remove any foreign objects from the brew chamber.

Repair Difficulty

Hard 4/5

Required Part

Brew Group Assembly

Check Price on Amazon

We may earn a commission from links on this page.