Steam wand spits water and large droplets instead of dry steam

Step 1 – Purge steam wand:

• After the machine indicates ready, open the steam valve and let water/steam run for 10–15 seconds into a container.
• This clears condensation.

Step 2 – Descale:

• Run a descaling cycle focusing on the steam circuit.

Step 3 – Clean wand:

• Clean the steam wand tip; ensure all holes are clear.

Step 4 – Check for leaks (advanced):

• Inspect the steam circuit for leaks that could reduce pressure; replace seals or valves as needed.