Vacuum has very weak suction but runs continuously; no error lights or codes displayed.

Safety: Turn off and remove the battery before disassembling parts.

• Check bin and seals: Ensure the bin is fully closed and latched. Inspect rubber seals around the bin and cyclone for damage or misalignment.
• Clean cyclone shroud: Remove the bin and brush dust off the metal shroud holes with a soft brush.
• Wash filters: Clean pre-motor and post-motor filters as recommended and dry fully.
• Inspect connections: Ensure the wand, tools, and cleaner head are firmly clicked into place with no gaps.
• Test without wand/head: Run the vacuum with the wand and head removed. If suction at the main body is strong, the issue is in the wand or head; inspect and replace as needed.