Eureka Brushroll Drive Failure

Brushroll does not spin, but suction is present; no error code shown.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Broken or stretched drive belt (if belt-driven), Failed brushroll motor, Disconnected nozzle wiring, Jammed brushroll bearings

How to Fix / Troubleshooting

Safety first: Remove the battery and detach the nozzle.

Steps to try:

  • Check for jams: Remove the brushroll and clear all hair and debris from the ends and bearings.
  • Inspect belt: If your Eureka cordless nozzle uses a belt, check for breakage or slack. Replace if damaged.
  • Test motor: With the nozzle open and battery installed, briefly power on (keeping fingers clear) to see if the motor shaft spins. If not, the motor or wiring is faulty.
  • Check wiring: Inspect the wiring harness inside the nozzle and at the wand connection. Reseat any loose connectors.
  • Replace nozzle: If the motor is dead or the PCB is burnt, replace the entire motorized nozzle assembly.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Brushroll Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements