Fine dust accumulates around the bin seal and leaks onto the vacuum body.

Safety first: Remove the battery pack before cleaning seals.

• 1. Clean sealing surfaces: Wipe the bin rim and mating surface on the body with a dry or slightly damp cloth. Remove all dust and debris.
• 2. Inspect gasket: Check the rubber gasket for cracks, cuts, or flattening. If damaged, replace the gasket or the entire dust container assembly.
• 3. Reinstall carefully: Refit the bin, ensuring it is aligned and fully locked into place.
• 4. Monitor for leaks: After a few uses, check again for dust around the seal. Persistent leakage indicates the need for a new bin or seal.