Insignia Tilt / Orientation Sensor or Loose Connection

Vacuum shuts off when tilted to certain angles or when used above the head.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Over‑sensitive tilt sensor, Loose internal wiring, Battery losing contact when tilted, Cracked solder joints on PCB

Safety first: Remove the battery before inspection.

Check battery fit: Ensure the battery is secure and does not move when the vacuum is tilted.
Recreate issue: With the vacuum running, gently tilt it and observe if power cuts out consistently at certain angles.
Service required: Internal sensor or wiring issues require disassembly and should be handled by a technician.

Hard 4/5

Main Control PCB

Check Price on Amazon

We may earn a commission from links on this page.