OKP Excessive Operating Temperature

Vacuum body becomes unusually hot to the touch during normal use.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Restricted airflow through filters, Running continuously on MAX power, Failing motor drawing excess current, Blocked cooling vents

Safety first: Turn OFF the vacuum, remove the battery, and allow it to cool completely.

Clean filters and vents: Follow the full filter cleaning procedure and clear all cooling vents around the motor housing.
Reduce power level: Use lower power settings for routine cleaning, reserving MAX for short bursts.
Monitor temperature: After cleaning, run the vacuum for a few minutes and check if it still becomes very hot.
If overheating continues: The main suction motor may be failing internally. Professional replacement is recommended.

Medium 3/5

Main Suction Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.