OKP Display / Indicator Power Fault

Vacuum runs but the display or indicator LEDs do not light up.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed LED/display board, Loose connector between display and main PCB, Damaged display ribbon cable, Blown display driver component

How to Fix / Troubleshooting

Safety first: Remove the battery before inspection.

  • Check basic operation: Confirm that suction and brush functions work normally. If so, the issue is isolated to the display.
  • Reset unit: Remove the battery for 1 minute, then reinstall and test again.
  • If display remains off: The display/indicator PCB or its cable is likely faulty. Replacement requires opening the handle or body and should be done by a technician.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Display / Indicator PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements