OKP
No Power / Dead Unit
Vacuum will not start at all, no lights or response when pressing the power button.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Completely discharged or failed battery pack, Faulty charger not charging battery, Failed main power switch, Open circuit on main control PCB
How to Fix / Troubleshooting
Safety first: Do not attempt to open the battery or charger.
- Verify charger operation: Plug the charger into a known‑good outlet and connect the battery. Confirm that the charger LED lights up. If not, replace the OKP charger.
- Try another battery: If available, test with a known‑good OKP battery. If the vacuum powers on, your original battery is faulty.
- Check power button: Ensure the power button or trigger is not stuck or physically damaged.
- If still dead with good battery and charger: The main control PCB or internal wiring is likely open. This requires professional diagnosis and repair.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
OKP Battery Charger
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements