Cordless Shark vacuum leaves a trail of dust behind the unit or around the exhaust

Safety first: Remove the battery before opening the filter or dust cup compartments.

• 1. Inspect HEPA and post‑motor filters: Remove the filters and check for tears, holes, or warping. Replace if damaged.
• 2. Reseat filters properly: Ensure filters are installed in the correct orientation and fully seated in their frames.
• 3. Check dust cup for cracks: Examine the dust cup and its seals. Replace the dust cup if it is cracked or does not seal properly.
• 4. Clean filter housing: Wipe dust from the filter housing and sealing surfaces to ensure a tight fit.