E15
Amica
Base Leak / Anti-Flood Triggered (Variant Code)
Dishwasher shows E15 and may continuously run the drain pump
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Water leak into base tray, Faulty float switch, Cracked tub or hose, Loose pump seal
How to Fix / Troubleshooting
Safety first: Disconnect power and close the water tap immediately.
- Pull out appliance: Carefully slide the dishwasher out of the cabinet.
- Drain base tray: Tilt the machine slightly backward and to one side over towels to let water escape from the base tray.
- Inspect for leaks: Remove the base panel and run a short fill-only test while watching for drips from hoses, the circulation pump, drain pump, or tub seams.
- Repair leak source: Tighten hose clamps, replace cracked hoses, or renew pump seals as needed.
- Do not ignore: Repeated E15 indicates an unresolved leak that can damage flooring and electrics.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Hoses and Seals (Leak Source Dependent)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements