Dishwasher displays E18 and does not take in enough water

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partially closed tap, Clogged inlet filter, Kinked inlet hose, Faulty flow meter or inlet valve

Safety first: Turn off power and close the water tap before disconnecting hoses.

Open tap fully: Ensure the stop valve under the sink is fully open.
Clean inlet filter: Disconnect the inlet hose from the tap and from the dishwasher, remove the small mesh filters, and rinse them thoroughly.
Check hose routing: Make sure the hose is not kinked or pinched behind the cabinet.
Test fill: Reconnect everything, open the tap, and run a short program. If E18 persists, the inlet valve or flow meter may need replacement.

Medium 3/5

Inlet Hose and Filter

Check Price on Amazon

We may earn a commission from links on this page.