E19
Arcelik
Diverter Valve / Regeneration Valve Error
Dishwasher shows E19 and may stop during program changes or when switching functions.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck diverter valve motor, Blocked diverter mechanism, Faulty regeneration valve coil, Wiring fault to valve
How to Fix / Troubleshooting
Safety first: Disconnect power and water supply before accessing the base or side panels.
- Locate diverter/regeneration valve: On many Arcelik models, the diverter valve is attached to the sump or side water distribution system.
- Inspect for blockage: Remove the valve assembly if accessible and check for debris or scale preventing movement.
- Test coil or motor: Use a multimeter to measure resistance of the valve coil or motor. Replace if open circuit.
- Check wiring: Ensure connectors are firmly seated and wires are not damaged.
- Replace valve assembly: If the valve is mechanically or electrically faulty, install a new Arcelik-compatible diverter or regeneration valve.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Diverter / Regeneration Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements