Candy Base Leak / Hose or Pump Seal Failure

Dishwasher leaks water from underneath; puddle appears under the machine.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose or split internal hose, Failed circulation pump seal, Cracked sump or tub, Leaking inlet valve or AquaStop hose on Candy dishwasher

How to Fix / Troubleshooting

Safety first: Unplug the dishwasher and close the water tap immediately. Do not continue using a leaking appliance.

  • Pull out the machine: Carefully slide the dishwasher out from under the counter. Have towels ready to catch any water.
  • Inspect hoses and joints: Remove side panels and check all visible hoses, clamps, and joints for drips or mineral tracks indicating leaks.
  • Check pump and sump: Examine the circulation pump and drain pump seals for signs of water. Look for cracks in the plastic sump or tub.
  • Test with a small fill: After drying the base, run a short cycle while observing the underside to locate the leak source.
  • Replace faulty components: Replace any leaking hose, clamp, pump, or sump. Structural cracks in the tub often require professional assessment or tub replacement.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Circulation Pump Seal Kit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements