Candy Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water; cycle stops shortly after start and E1 is shown on the display.
Water Inlet Timeout / No Fill
E10
Dishwasher displays E10; may be associated with filling or heating anomalies depending on model.
Configuration / Communication or Extended Fill Error
E11
Dishwasher shows E11 and may not start or may stop shortly after starting.
NTC Temperature Sensor Fault
E12
Dishwasher displays E12; may be linked to heating or drying performance issues.
Heater Overtemperature / Sensor Calibration Error
E13
Dishwasher shows E13; may not start or may abort during wash.
Door Lock / Door Switch Error
E14
Dishwasher displays E14; may be associated with unusual water level behavior or repeated filling and draining.
Water Level Calibration / Overflow Sensor Error
E15
Dishwasher shows E15; may not start and may indicate a serious internal fault.
Main Control Board / Communication Error
E16
Dishwasher displays E16; may be related to sensor or communication issues.
Sensor Communication / Internal Data Error
E17
Dishwasher shows E17; may not start or may stop unexpectedly.
Power Supply / Voltage Error
E18
Dishwasher displays E18; may be associated with drain or fill timing issues depending on model.
Extended Drain / Fill Time Error
E19
Dishwasher shows E19; may not start or may freeze during operation.
EEPROM / Configuration Data Error
E2
Dishwasher stops mid-cycle and displays E2; machine may have water inside and not proceed.
Water Level Sensing / Pressure Switch Error
E3
Dishwasher fills but does not heat the water; cycle may run very long and ends with E3 on the display.
Heating Circuit Failure
E4
Dishwasher stops and displays E4; often accompanied by continuous drain pump operation and no filling.
Anti-Flood / Overflow Protection Activated
E5
Dishwasher does not drain properly; water remains in the bottom and E5 is shown on the display.
Drain Pump / Drainage Fault
E6
Dishwasher stops and displays E6; may not start washing phase or may stop shortly after filling.
Water Turbidity / Optical Sensor Error
E7
Dishwasher shows E7 and may not complete the cycle; water level or temperature readings seem inconsistent.
Flow Meter / Water Intake Measurement Error
E8
Dishwasher displays E8; water level appears too low or spray arms do not rotate properly.
Insufficient Water Level / Circulation Fault
E9
Dishwasher shows E9 and may stop during the drying or final rinse phase.
Drying System / Fan or Heater Error
Symptom
Dishwasher displays no error but stops mid-cycle and becomes unresponsive until power is cycled.
Intermittent Control Board Lockup / Overheating
Symptom
Dishwasher displays random lights or buttons do not respond correctly; control panel behaves erratically.
User Interface / Touch Control Fault
Symptom
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom but no error code is shown.
Partial Drain Blockage
Symptom
Dishwasher does not power on at all; no lights or display, Candy logo does not illuminate.
No Mains Power / Dead Appliance
Symptom
Dishwasher does not take detergent from the dispenser; tablet or powder remains in the cup after the cycle.
Detergent Dispenser Door Not Opening Correctly
Symptom
Dishwasher door drops down quickly or will not stay in the half-open position.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher emits a bad smell, musty or rotten odor when opened.
Biofilm / Bacterial Build-Up in Sump and Hoses
Symptom
Dishwasher interior light (if fitted) does not work, but the machine otherwise operates normally.
Interior Light Failure
Symptom
Dishwasher is very noisy during wash or spin-like phases; grinding or rattling sounds are heard.
Mechanical Noise / Pump or Spray Arm Interference
Symptom
Dishwasher leaks water from the front bottom of the door during the cycle.
Door Seal / Bottom Seal Leak
Symptom
Dishwasher leaks water from underneath; puddle appears under the machine.
Base Leak / Hose or Pump Seal Failure
Symptom
Dishwasher leaves rust-colored marks or corrosion on cutlery or inside the tub.
Corrosion / Water Chemistry Issue
Symptom
Dishwasher leaves water droplets and poor drying results; plastics are especially wet.
Poor Drying Performance
Symptom
Dishwasher leaves white film or spots on glasses and dishes after the cycle.
Limescale Deposits / Rinse Aid or Salt Issue
Symptom
Dishwasher overfills; water level is very high inside and may leak from the door without showing an error code.
Overfilling / Water Level Control Failure
Symptom
Dishwasher powers on but will not start a cycle; start button flashes or beeps and door symbol may appear.
Door Not Detected Closed
Symptom
Dishwasher racks are difficult to slide or feel rough; upper basket may drop or not stay at set height.
Rack Rail / Wheel Wear
Symptom
Dishwasher runs but dishes come out dirty or with food residues, especially on the top rack.
Poor Wash Performance / Low Spray Pressure
Symptom
Dishwasher takes much longer than the time shown on the display; cycles extend significantly.
Extended Cycle Time / Adaptive Wash Behavior
Symptom
Dishwasher trips the household circuit breaker or RCD during operation.
Electrical Short / Earth Leakage
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water; cycle stops shortly after start and E1 is shown on the display.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher displays E10; may be associated with filling or heating anomalies depending on model.
|
Configuration / Communication or Extended Fill Error | View Details |
| E11 |
Dishwasher shows E11 and may not start or may stop shortly after starting.
|
NTC Temperature Sensor Fault | View Details |
| E12 |
Dishwasher displays E12; may be linked to heating or drying performance issues.
|
Heater Overtemperature / Sensor Calibration Error | View Details |
| E13 |
Dishwasher shows E13; may not start or may abort during wash.
|
Door Lock / Door Switch Error | View Details |
| E14 |
Dishwasher displays E14; may be associated with unusual water level behavior or repeated filling and draining.
|
Water Level Calibration / Overflow Sensor Error | View Details |
| E15 |
Dishwasher shows E15; may not start and may indicate a serious internal fault.
|
Main Control Board / Communication Error | View Details |
| E16 |
Dishwasher displays E16; may be related to sensor or communication issues.
|
Sensor Communication / Internal Data Error | View Details |
| E17 |
Dishwasher shows E17; may not start or may stop unexpectedly.
|
Power Supply / Voltage Error | View Details |
| E18 |
Dishwasher displays E18; may be associated with drain or fill timing issues depending on model.
|
Extended Drain / Fill Time Error | View Details |
| E19 |
Dishwasher shows E19; may not start or may freeze during operation.
|
EEPROM / Configuration Data Error | View Details |
| E2 |
Dishwasher stops mid-cycle and displays E2; machine may have water inside and not proceed.
|
Water Level Sensing / Pressure Switch Error | View Details |
| E3 |
Dishwasher fills but does not heat the water; cycle may run very long and ends with E3 on the display.
|
Heating Circuit Failure | View Details |
| E4 |
Dishwasher stops and displays E4; often accompanied by continuous drain pump operation and no filling.
|
Anti-Flood / Overflow Protection Activated | View Details |
| E5 |
Dishwasher does not drain properly; water remains in the bottom and E5 is shown on the display.
|
Drain Pump / Drainage Fault | View Details |
| E6 |
Dishwasher stops and displays E6; may not start washing phase or may stop shortly after filling.
|
Water Turbidity / Optical Sensor Error | View Details |
| E7 |
Dishwasher shows E7 and may not complete the cycle; water level or temperature readings seem inconsistent.
|
Flow Meter / Water Intake Measurement Error | View Details |
| E8 |
Dishwasher displays E8; water level appears too low or spray arms do not rotate properly.
|
Insufficient Water Level / Circulation Fault | View Details |
| E9 |
Dishwasher shows E9 and may stop during the drying or final rinse phase.
|
Drying System / Fan or Heater Error | View Details |
| – |
Dishwasher displays no error but stops mid-cycle and becomes unresponsive until power is cycled.
|
Intermittent Control Board Lockup / Overheating | View Details |
| – |
Dishwasher displays random lights or buttons do not respond correctly; control panel behaves erratically.
|
User Interface / Touch Control Fault | View Details |
| – |
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom but no error code is shown.
|
Partial Drain Blockage | View Details |
| – |
Dishwasher does not power on at all; no lights or display, Candy logo does not illuminate.
|
No Mains Power / Dead Appliance | View Details |
| – |
Dishwasher does not take detergent from the dispenser; tablet or powder remains in the cup after the cycle.
|
Detergent Dispenser Door Not Opening Correctly | View Details |
| – |
Dishwasher door drops down quickly or will not stay in the half-open position.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher emits a bad smell, musty or rotten odor when opened.
|
Biofilm / Bacterial Build-Up in Sump and Hoses | View Details |
| – |
Dishwasher interior light (if fitted) does not work, but the machine otherwise operates normally.
|
Interior Light Failure | View Details |
| – |
Dishwasher is very noisy during wash or spin-like phases; grinding or rattling sounds are heard.
|
Mechanical Noise / Pump or Spray Arm Interference | View Details |
| – |
Dishwasher leaks water from the front bottom of the door during the cycle.
|
Door Seal / Bottom Seal Leak | View Details |
| – |
Dishwasher leaks water from underneath; puddle appears under the machine.
|
Base Leak / Hose or Pump Seal Failure | View Details |
| – |
Dishwasher leaves rust-colored marks or corrosion on cutlery or inside the tub.
|
Corrosion / Water Chemistry Issue | View Details |
| – |
Dishwasher leaves water droplets and poor drying results; plastics are especially wet.
|
Poor Drying Performance | View Details |
| – |
Dishwasher leaves white film or spots on glasses and dishes after the cycle.
|
Limescale Deposits / Rinse Aid or Salt Issue | View Details |
| – |
Dishwasher overfills; water level is very high inside and may leak from the door without showing an error code.
|
Overfilling / Water Level Control Failure | View Details |
| – |
Dishwasher powers on but will not start a cycle; start button flashes or beeps and door symbol may appear.
|
Door Not Detected Closed | View Details |
| – |
Dishwasher racks are difficult to slide or feel rough; upper basket may drop or not stay at set height.
|
Rack Rail / Wheel Wear | View Details |
| – |
Dishwasher runs but dishes come out dirty or with food residues, especially on the top rack.
|
Poor Wash Performance / Low Spray Pressure | View Details |
| – |
Dishwasher takes much longer than the time shown on the display; cycles extend significantly.
|
Extended Cycle Time / Adaptive Wash Behavior | View Details |
| – |
Dishwasher trips the household circuit breaker or RCD during operation.
|
Electrical Short / Earth Leakage | View Details |
No matching codes found
Advertisements