E18
Candy
Extended Drain / Fill Time Error
Dishwasher displays E18; may be associated with drain or fill timing issues depending on model.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Partially blocked drain hose or pump, Low water pressure causing slow fill, Clogged inlet filter, Control board timing miscalculation
How to Fix / Troubleshooting
Safety first: Unplug the appliance and close the water tap before working on hoses.
- Clean filters and sump: Remove and clean the filter assembly and sump area thoroughly.
- Check drain hose and sink connection: Ensure the hose is not kinked and the sink spigot is clear. Remove any blockages.
- Clean inlet filter: Remove the inlet hose from the tap and clean the mesh filter. Confirm water pressure is adequate.
- Run a test cycle: After cleaning, run a short program and observe fill and drain times. If E18 returns, further diagnosis of the pump, inlet valve, or control board is required.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements