CDA
Door Spring / Hinge Cable Failure
Dishwasher door drops down quickly or will not stay in a partially open position.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken door springs, Snapped tension cables, Worn hinge mechanism, Incorrect panel weight on integrated models
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before working on the door hinges or springs.
- Support the door: Use a prop or have a helper hold the door while inspecting hinges.
- Remove side panels: Take off the side panels to access the door springs and tension cables.
- Inspect springs and cables: Look for broken or detached springs and frayed or snapped cables.
- Replace in pairs: Replace both springs or both cables with CDA-compatible parts to maintain balanced tension.
- Check panel weight: On integrated models, ensure the decorative door panel is within the weight specified by CDA.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Spring and Cable Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements