CDA Door Seal / Door Alignment Leak

Dishwasher leaks water from the front of the door during the wash cycle.

Advertisements

Possible Causes

Worn or damaged door gasket, Blocked lower spray arm causing water to jet at door, Over-foaming from incorrect detergent, Misaligned door or hinges

How to Fix / Troubleshooting

Safety first: Unplug the dishwasher and turn off the water supply before inspecting for leaks.

  • Inspect door gasket: Open the door and examine the rubber seal around the tub opening for tears, flattening, or gaps. Replace if damaged.
  • Clean gasket and mating surfaces: Wipe away grease and debris from the seal and the door edge.
  • Check spray arms: Ensure the lower spray arm is not cracked or blocked, which can cause water to spray directly at the door. Clean or replace as needed.
  • Use correct detergent: Avoid hand-washing liquid. Excess foam can push water out of the door.
  • Check door alignment: Verify that the door closes evenly on both sides. Adjust the leveling feet and mounting brackets if necessary.
Advertisements

Repair Difficulty

Easy 2/5

Required Part

Door Gasket
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements