Dishwasher leaves white, chalky deposits or streaks on glasses and dishes.

Safety first: Allow the dishwasher to cool before working inside.

• Check salt level: Open the salt reservoir (usually in the base) and refill with dishwasher salt if low. Wipe away any spilled salt.
• Set water hardness: Refer to the CDA manual to adjust the built-in softener setting according to your local water hardness.
• Refill rinse aid: Ensure the rinse aid dispenser is filled and the dosage setting is appropriate.
• Clean spray arms: Remove and clean spray arms to ensure proper rinsing.
• Run descaling cycle: Use a dishwasher descaler on a hot program to remove existing limescale.