Electrolux
Base Leak / Internal Hose or Component Leak
Dishwasher leaks water from underneath the unit onto the floor.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Cracked circulation pump housing, Loose hose clamp on sump or heater, Leaking Electrolux inlet valve, Damaged tub-to-sump seal
How to Fix / Troubleshooting
Safety first: Turn off power and close the water supply. Use towels to contain water.
- Pull out dishwasher: Carefully slide the unit out of the cabinet to inspect the underside.
- Identify leak source: Run a short cycle while observing the base (use a flashlight). Look for drips from hoses, pump, heater, or inlet valve.
- Tighten or replace: Tighten loose clamps, replace cracked hoses, and replace any leaking components such as the circulation pump or inlet valve.
- Dry base pan: Thoroughly dry the base pan and ensure the float switch is reset before reassembling.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electrolux Sump and Hose Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements