Electrolux Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
CL
Dishwasher shows CL and will not start; buttons may be unresponsive.
Child Lock / Control Lock Activated
d0
Dishwasher shows d0; door-related error, may not start cycle.
Door Not Closed / Door Lock Fault
d1
Dishwasher displays d1; may indicate door open during cycle.
Door Open Detection Fault
E1
Dishwasher stops early in the cycle and displays E1; often associated with filling problems.
Fill Error / Water Supply Fault
E2
Dishwasher shows E2 and may not heat water properly.
Heating Circuit Error
E3
Dishwasher displays E3; water may be too hot or cycle may abort during heating.
Overheating / Temperature Control Fault
E4
Dishwasher shows E4 and may leak or overfill.
Overflow / Leak Detection Error
E5
Dishwasher displays E5; often related to water level or filling time.
Water Level / Fill Time Error
E6
Dishwasher shows E6; may not detect water level correctly.
Water Level Sensor / Flow Meter Fault
E7
Dishwasher displays E7; may be associated with drying or fan operation issues.
Drying Fan / Ventilation Fault
E8
Dishwasher shows E8; water level or circulation may be abnormal.
Circulation / Water Level Combination Fault
E9
Dishwasher displays E9; often related to heater or drying issues.
Heater / Drying System Fault
i10
Dishwasher will not fill with water; cycle starts then quickly stops and displays i10.
Water Inlet Timeout / Low Fill
i20
Dishwasher stops mid-cycle, does not drain properly, and displays i20.
Drain System Fault / Drain Timeout
i30
Dishwasher stops and repeatedly runs the drain pump; i30 error displayed, sometimes accompanied by beeping.
Leak Detected / Anti-Flood System Activated
i40
Dishwasher displays i40 and may stop mid-cycle or not start a new cycle.
Pressure Sensor / Water Level Sensor Fault
i50
Dishwasher stops and shows i50; may not circulate water or may stop shortly after starting.
Wash Motor / Triac Fault
i60
Dishwasher shows i60; water may not heat, or cycle may end with cold dishes.
Heating System Fault
i70
Dishwasher displays i70; may complete cycles but with irregular heating or drying performance.
Temperature Sensor (NTC) Calibration / Fault
i80
Dishwasher shows i80 and may not start or may behave erratically.
Program Memory / Control Board Configuration Error
i90
Dishwasher displays i90 and will not run a cycle.
Communication Error Between User Interface and Main Control
iA0
Dishwasher displays iA0; often related to spray arm or loading issues.
Spray Arm Rotation / Spray Pressure Fault
iC0
Dishwasher shows iC0; may be associated with control or sensor issues.
General Control / Sensor Communication Fault
iF0
Dishwasher displays iF0 and may overfill or run the drain pump continuously.
Overfill / Water Level Sensing Fault
iL0
Dishwasher shows iL0; often related to low water level or circulation issues.
Low Water Level / Circulation Fault
iX0
Dishwasher displays iX0; may be associated with sensor or option module issues depending on model.
Auxiliary Sensor / Option Module Fault
PF
Dishwasher displays PF; cycle interrupted and may need to be restarted.
Power Failure / Interruption
Symptom
Cycle times are much longer than normal or seem to never finish.
Extended Cycle Duration
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening / Poor Water Reach
Symptom
Dishes are wet or not fully dry at the end of the cycle.
Poor Drying Performance
Symptom
Dishes come out dirty or with food residue after a full cycle.
Poor Cleaning Performance
Symptom
Dishwasher does not drain; standing water remains in the bottom after cycle completes.
No Drain / Poor Drainage
Symptom
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
No Wash / Circulation Pump Failure
Symptom
Dishwasher leaks water from the front door area during the wash cycle.
Door Leak / Gasket Failure
Symptom
Dishwasher leaks water from underneath the unit onto the floor.
Base Leak / Internal Hose or Component Leak
Symptom
Dishwasher makes a high-pitched whining or squealing noise during operation.
Pump or Motor Bearing Wear
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump / Mechanical Noise
Symptom
Dishwasher powers on but will not start a cycle when Start is pressed.
No Start / Start Inhibit
Symptom
Dishwasher stops mid-cycle and all lights go off, then may resume later.
Intermittent Power Loss / Overheating Protection
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Installation Issue
Symptom
Dishwasher will not power on at all; no lights or display, completely dead.
No Power / Dead Appliance
Symptom
Rust spots appear on cutlery or inside the dishwasher tub.
Corrosion / Rust Contamination
Symptom
Unpleasant odor coming from the dishwasher, especially when opened after being idle.
Odor / Bacterial Growth
Symptom
Water remains in the bottom of the dishwasher between cycles, slowly seeping back in after draining.
Backflow from Sink / Improper Drain Installation
Symptom
White film or cloudy residue on dishes and glassware after washing.
Limescale / Hard Water Deposits
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| CL |
Dishwasher shows CL and will not start; buttons may be unresponsive.
|
Child Lock / Control Lock Activated | View Details |
| d0 |
Dishwasher shows d0; door-related error, may not start cycle.
|
Door Not Closed / Door Lock Fault | View Details |
| d1 |
Dishwasher displays d1; may indicate door open during cycle.
|
Door Open Detection Fault | View Details |
| E1 |
Dishwasher stops early in the cycle and displays E1; often associated with filling problems.
|
Fill Error / Water Supply Fault | View Details |
| E2 |
Dishwasher shows E2 and may not heat water properly.
|
Heating Circuit Error | View Details |
| E3 |
Dishwasher displays E3; water may be too hot or cycle may abort during heating.
|
Overheating / Temperature Control Fault | View Details |
| E4 |
Dishwasher shows E4 and may leak or overfill.
|
Overflow / Leak Detection Error | View Details |
| E5 |
Dishwasher displays E5; often related to water level or filling time.
|
Water Level / Fill Time Error | View Details |
| E6 |
Dishwasher shows E6; may not detect water level correctly.
|
Water Level Sensor / Flow Meter Fault | View Details |
| E7 |
Dishwasher displays E7; may be associated with drying or fan operation issues.
|
Drying Fan / Ventilation Fault | View Details |
| E8 |
Dishwasher shows E8; water level or circulation may be abnormal.
|
Circulation / Water Level Combination Fault | View Details |
| E9 |
Dishwasher displays E9; often related to heater or drying issues.
|
Heater / Drying System Fault | View Details |
| i10 |
Dishwasher will not fill with water; cycle starts then quickly stops and displays i10.
|
Water Inlet Timeout / Low Fill | View Details |
| i20 |
Dishwasher stops mid-cycle, does not drain properly, and displays i20.
|
Drain System Fault / Drain Timeout | View Details |
| i30 |
Dishwasher stops and repeatedly runs the drain pump; i30 error displayed, sometimes accompanied by beeping.
|
Leak Detected / Anti-Flood System Activated | View Details |
| i40 |
Dishwasher displays i40 and may stop mid-cycle or not start a new cycle.
|
Pressure Sensor / Water Level Sensor Fault | View Details |
| i50 |
Dishwasher stops and shows i50; may not circulate water or may stop shortly after starting.
|
Wash Motor / Triac Fault | View Details |
| i60 |
Dishwasher shows i60; water may not heat, or cycle may end with cold dishes.
|
Heating System Fault | View Details |
| i70 |
Dishwasher displays i70; may complete cycles but with irregular heating or drying performance.
|
Temperature Sensor (NTC) Calibration / Fault | View Details |
| i80 |
Dishwasher shows i80 and may not start or may behave erratically.
|
Program Memory / Control Board Configuration Error | View Details |
| i90 |
Dishwasher displays i90 and will not run a cycle.
|
Communication Error Between User Interface and Main Control | View Details |
| iA0 |
Dishwasher displays iA0; often related to spray arm or loading issues.
|
Spray Arm Rotation / Spray Pressure Fault | View Details |
| iC0 |
Dishwasher shows iC0; may be associated with control or sensor issues.
|
General Control / Sensor Communication Fault | View Details |
| iF0 |
Dishwasher displays iF0 and may overfill or run the drain pump continuously.
|
Overfill / Water Level Sensing Fault | View Details |
| iL0 |
Dishwasher shows iL0; often related to low water level or circulation issues.
|
Low Water Level / Circulation Fault | View Details |
| iX0 |
Dishwasher displays iX0; may be associated with sensor or option module issues depending on model.
|
Auxiliary Sensor / Option Module Fault | View Details |
| PF |
Dishwasher displays PF; cycle interrupted and may need to be restarted.
|
Power Failure / Interruption | View Details |
| – |
Cycle times are much longer than normal or seem to never finish.
|
Extended Cycle Duration | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening / Poor Water Reach | View Details |
| – |
Dishes are wet or not fully dry at the end of the cycle.
|
Poor Drying Performance | View Details |
| – |
Dishes come out dirty or with food residue after a full cycle.
|
Poor Cleaning Performance | View Details |
| – |
Dishwasher does not drain; standing water remains in the bottom after cycle completes.
|
No Drain / Poor Drainage | View Details |
| – |
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
|
No Wash / Circulation Pump Failure | View Details |
| – |
Dishwasher leaks water from the front door area during the wash cycle.
|
Door Leak / Gasket Failure | View Details |
| – |
Dishwasher leaks water from underneath the unit onto the floor.
|
Base Leak / Internal Hose or Component Leak | View Details |
| – |
Dishwasher makes a high-pitched whining or squealing noise during operation.
|
Pump or Motor Bearing Wear | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump / Mechanical Noise | View Details |
| – |
Dishwasher powers on but will not start a cycle when Start is pressed.
|
No Start / Start Inhibit | View Details |
| – |
Dishwasher stops mid-cycle and all lights go off, then may resume later.
|
Intermittent Power Loss / Overheating Protection | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Dishwasher will not power on at all; no lights or display, completely dead.
|
No Power / Dead Appliance | View Details |
| – |
Rust spots appear on cutlery or inside the dishwasher tub.
|
Corrosion / Rust Contamination | View Details |
| – |
Unpleasant odor coming from the dishwasher, especially when opened after being idle.
|
Odor / Bacterial Growth | View Details |
| – |
Water remains in the bottom of the dishwasher between cycles, slowly seeping back in after draining.
|
Backflow from Sink / Improper Drain Installation | View Details |
| – |
White film or cloudy residue on dishes and glassware after washing.
|
Limescale / Hard Water Deposits | View Details |
No matching codes found
Advertisements