Dishwasher displays E13 and may stop with water remaining in the tub or with unusual fill/drain behavior.

Safety first: Disconnect power and close the water tap immediately.

• Inspect AquaStop hose: If your Gorenje dishwasher uses an AquaStop inlet hose, check the external casing for bulges, cracks, or water inside the safety box.
• Reset by replacement: Many AquaStop devices are non-resettable; if triggered by a leak, the entire hose assembly must be replaced.
• Check for leaks: Inspect the connection at the tap and at the dishwasher inlet for signs of leakage that may have activated the safety.
• Electrical check: Verify that the AquaStop coil receives power during fill and that the connector is secure.

If the AquaStop has been activated due to an internal leak, locate and repair the leak before fitting a new hose.