Gorenje Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water, cycle stops shortly after start and E1 is shown on the display.
Water Inlet Timeout / No Fill
E10
Dishwasher shows E10 and may not start the wash cycle; sometimes accompanied by no water intake or immediate drain.
Water Distribution / Diverter Valve Error
E11
Dishwasher displays E11 and may not complete the cycle; sometimes associated with incorrect temperature readings.
NTC Temperature Sensor Error
E12
Dishwasher shows E12 and may have issues with drying performance or fan operation.
Drying System / Fan Error
E13
Dishwasher displays E13 and may stop with water remaining in the tub or with unusual fill/drain behavior.
AquaStop / Inlet Safety System Error
E14
Dishwasher shows E14 and may not start or may stop unexpectedly; sometimes associated with door not latching properly.
Door Lock / Door Switch Error
E15
Dishwasher displays E15 and may not start; sometimes accompanied by beeping and no other activity.
Control Panel / User Interface Communication Error
E16
Dishwasher shows E16 and may stop with water in the tub or fail to drain correctly.
Backflow / Siphon Error
E17
Dishwasher displays E17 and may not fill correctly, or fills too slowly.
Water Inlet Flow Error
E18
Dishwasher shows E18 and stops early in the cycle, often with very little water inside.
Underfill / Short Fill Error
E19
Dishwasher displays E19 and may have issues with regeneration or water softener function.
Water Softener / Regeneration Valve Error
E2
Dishwasher does not drain, water remains in the bottom of the tub and E2 is displayed.
Drain Pump Failure / Drain Timeout
E20
Dishwasher shows E20 and may stop with water in the tub or with poor drainage performance.
Drain System General Error
E3
Dishwasher fills but does not heat the water; cycles take unusually long and E3 appears on the display.
Heating Circuit Failure
E4
Dishwasher stops mid-cycle and displays E4, often accompanied by water in the base tray and the drain pump running continuously.
Anti-Flood / Overflow Protection Activated
E5
Dishwasher overfills with water, water level is very high in the tub or may leak from the door, and E5 is displayed.
Overfill / Water Level Sensor Fault
E6
Dishwasher stops and shows E6, often without filling or with erratic filling behavior.
Water Level Sensor / Pressure Switch Error
E7
Dishwasher displays E7 and may stop shortly after starting the wash, sometimes with no water circulation.
Circulation Pump / Motor Error
E8
Dishwasher shows E8 and dishes come out dirty; water level may appear low and spray arms may not rotate properly.
Insufficient Water Level / Flow Restriction
E9
Dishwasher displays E9 and may stop during the wash or rinse phase, often with poor circulation.
Heater / Circulation System Combination Fault
Symptom
Dishwasher display or indicator lights flicker or go blank during operation, but the machine continues running.
User Interface Power / Connection Issue
Symptom
Dishwasher does not dry dishes properly; items are wet at the end of the cycle.
Poor Drying Performance
Symptom
Dishwasher door drops down quickly or will not stay in the intermediate open position.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher door is hard to close or does not latch properly.
Door Alignment / Latch Issue
Symptom
Dishwasher has a bad smell, musty or rotten odor inside even when empty.
Odor / Bacterial Growth
Symptom
Dishwasher has power but will not start a cycle; Start button does nothing or only beeps.
Start Inhibit / Door or Program Selection Fault
Symptom
Dishwasher intermittently stops mid-cycle without any error code; may resume if door is opened and closed.
Intermittent Power / Door Switch Contact Issue
Symptom
Dishwasher is very noisy during operation, with grinding, rattling, or humming sounds.
Excessive Noise / Mechanical Interference
Symptom
Dishwasher leaks water from the front door during the wash cycle.
Door Seal / Spray Leak
Symptom
Dishwasher leaks water from underneath the cabinet.
Base Leak / Internal Hose or Sump Leak
Symptom
Dishwasher leaves detergent tablet partially undissolved in the dispenser or at the bottom of the tub.
Detergent Dispenser / Spray Coverage Issue
Symptom
Dishwasher leaves greasy or cloudy residue on dishes and inside the tub.
Grease Build-Up / Detergent Inefficiency
Symptom
Dishwasher leaves white film or spots on glasses and dishes.
Limescale Deposits / Poor Rinsing
Symptom
Dishwasher runs but dishes come out dirty or with food residues, especially on the top rack.
Poor Wash Performance / Insufficient Spray
Symptom
Dishwasher runs continuously for many hours and does not seem to finish the cycle.
Program Stuck / Heating or Sensor Fault Without Code
Symptom
Dishwasher vibrates excessively or moves during operation.
Vibration / Installation Fault
Symptom
Dishwasher will not power on at all; no lights or display, no response to buttons.
No Power / Main Supply Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water, cycle stops shortly after start and E1 is shown on the display.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher shows E10 and may not start the wash cycle; sometimes accompanied by no water intake or immediate drain.
|
Water Distribution / Diverter Valve Error | View Details |
| E11 |
Dishwasher displays E11 and may not complete the cycle; sometimes associated with incorrect temperature readings.
|
NTC Temperature Sensor Error | View Details |
| E12 |
Dishwasher shows E12 and may have issues with drying performance or fan operation.
|
Drying System / Fan Error | View Details |
| E13 |
Dishwasher displays E13 and may stop with water remaining in the tub or with unusual fill/drain behavior.
|
AquaStop / Inlet Safety System Error | View Details |
| E14 |
Dishwasher shows E14 and may not start or may stop unexpectedly; sometimes associated with door not latching properly.
|
Door Lock / Door Switch Error | View Details |
| E15 |
Dishwasher displays E15 and may not start; sometimes accompanied by beeping and no other activity.
|
Control Panel / User Interface Communication Error | View Details |
| E16 |
Dishwasher shows E16 and may stop with water in the tub or fail to drain correctly.
|
Backflow / Siphon Error | View Details |
| E17 |
Dishwasher displays E17 and may not fill correctly, or fills too slowly.
|
Water Inlet Flow Error | View Details |
| E18 |
Dishwasher shows E18 and stops early in the cycle, often with very little water inside.
|
Underfill / Short Fill Error | View Details |
| E19 |
Dishwasher displays E19 and may have issues with regeneration or water softener function.
|
Water Softener / Regeneration Valve Error | View Details |
| E2 |
Dishwasher does not drain, water remains in the bottom of the tub and E2 is displayed.
|
Drain Pump Failure / Drain Timeout | View Details |
| E20 |
Dishwasher shows E20 and may stop with water in the tub or with poor drainage performance.
|
Drain System General Error | View Details |
| E3 |
Dishwasher fills but does not heat the water; cycles take unusually long and E3 appears on the display.
|
Heating Circuit Failure | View Details |
| E4 |
Dishwasher stops mid-cycle and displays E4, often accompanied by water in the base tray and the drain pump running continuously.
|
Anti-Flood / Overflow Protection Activated | View Details |
| E5 |
Dishwasher overfills with water, water level is very high in the tub or may leak from the door, and E5 is displayed.
|
Overfill / Water Level Sensor Fault | View Details |
| E6 |
Dishwasher stops and shows E6, often without filling or with erratic filling behavior.
|
Water Level Sensor / Pressure Switch Error | View Details |
| E7 |
Dishwasher displays E7 and may stop shortly after starting the wash, sometimes with no water circulation.
|
Circulation Pump / Motor Error | View Details |
| E8 |
Dishwasher shows E8 and dishes come out dirty; water level may appear low and spray arms may not rotate properly.
|
Insufficient Water Level / Flow Restriction | View Details |
| E9 |
Dishwasher displays E9 and may stop during the wash or rinse phase, often with poor circulation.
|
Heater / Circulation System Combination Fault | View Details |
| – |
Dishwasher display or indicator lights flicker or go blank during operation, but the machine continues running.
|
User Interface Power / Connection Issue | View Details |
| – |
Dishwasher does not dry dishes properly; items are wet at the end of the cycle.
|
Poor Drying Performance | View Details |
| – |
Dishwasher door drops down quickly or will not stay in the intermediate open position.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher door is hard to close or does not latch properly.
|
Door Alignment / Latch Issue | View Details |
| – |
Dishwasher has a bad smell, musty or rotten odor inside even when empty.
|
Odor / Bacterial Growth | View Details |
| – |
Dishwasher has power but will not start a cycle; Start button does nothing or only beeps.
|
Start Inhibit / Door or Program Selection Fault | View Details |
| – |
Dishwasher intermittently stops mid-cycle without any error code; may resume if door is opened and closed.
|
Intermittent Power / Door Switch Contact Issue | View Details |
| – |
Dishwasher is very noisy during operation, with grinding, rattling, or humming sounds.
|
Excessive Noise / Mechanical Interference | View Details |
| – |
Dishwasher leaks water from the front door during the wash cycle.
|
Door Seal / Spray Leak | View Details |
| – |
Dishwasher leaks water from underneath the cabinet.
|
Base Leak / Internal Hose or Sump Leak | View Details |
| – |
Dishwasher leaves detergent tablet partially undissolved in the dispenser or at the bottom of the tub.
|
Detergent Dispenser / Spray Coverage Issue | View Details |
| – |
Dishwasher leaves greasy or cloudy residue on dishes and inside the tub.
|
Grease Build-Up / Detergent Inefficiency | View Details |
| – |
Dishwasher leaves white film or spots on glasses and dishes.
|
Limescale Deposits / Poor Rinsing | View Details |
| – |
Dishwasher runs but dishes come out dirty or with food residues, especially on the top rack.
|
Poor Wash Performance / Insufficient Spray | View Details |
| – |
Dishwasher runs continuously for many hours and does not seem to finish the cycle.
|
Program Stuck / Heating or Sensor Fault Without Code | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Vibration / Installation Fault | View Details |
| – |
Dishwasher will not power on at all; no lights or display, no response to buttons.
|
No Power / Main Supply Failure | View Details |
No matching codes found
Advertisements