E19
Gorenje
Water Softener / Regeneration Valve Error
Dishwasher displays E19 and may have issues with regeneration or water softener function.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty regeneration valve, Blocked softener channels, Wiring fault to regeneration coil, Control board output failure
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before accessing the base or side panels.
- Check salt level: Ensure the salt reservoir is filled with dishwasher salt and the cap is tight.
- Inspect regeneration valve: Locate the small valve on the softener assembly or water matrix. Check for leaks or damage.
- Wiring check: Verify that the valve coil connector is secure and wires are intact.
- Descale softener: Run a hot cycle with a dishwasher cleaner to help clear minor blockages.
- Replace valve: If the coil is open-circuit or the valve is stuck, replace the regeneration valve.
Improper softening can lead to limescale buildup; resolve E19 promptly to protect the appliance.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Regeneration Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements