Maidaid
Display / LED Fault
Dishwasher display works but some indicator lights or segments are missing or flickering.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed Maidaid display module, Loose ribbon cable, Moisture ingress in control panel, Faulty control PCB driver
How to Fix / Troubleshooting
Safety first: Disconnect power before opening the control panel.
- Inspect connections: Remove the front panel and check the ribbon cable between the Maidaid display and main PCB. Reseat firmly.
- Check for moisture: Look for condensation or water inside the panel. Dry thoroughly and address any door seal or steam leaks.
- Replace display: If segments remain missing, replace the Maidaid display module.
- PCB driver: If a new display does not resolve the issue, the main PCB may have a faulty display driver and should be replaced by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Maidaid Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements